How to set up your Belkin Router without utilizing the Setup CD?

Belkin Router is greatly helpful in providing high-speed internet in your home. If you have already purchased a Belkin Router without using the setup CD, then you should follow the post below.

Nowadays, most households use more than one Wi-Fi-enabled device that keeps on accessing the internet on a simultaneous basis.

To avoid the situation of disconnections, you can consider Belkin N300 router.

It’s for sure that you don’t want to experience the situation of Wi-Fi signal drop in the midway of your internet session. Hence, it’s very important to take help of a brilliantly-designed router.

If you have purchased Belkin Router, then you have to set it properly. To know about the Belkin N300 WiFi Router Setup, you can contact the Belkin customer care.

You can set up your Belkin router in the following two ways:

By using the attached Setup CD and

By using the built-in web-based setup page of the router

This post is all about setting up of the Belkin router without using the setup CD. Let’s check it out.

Verification of the Internet Connection

This step is very important to identify whether the internet connection, coming from your ISP (Internet Service Provider), is correctly working or not.

It is assumed that you own a modem but if you don’t, kindly overlook the step 1 and step 2 discussed below. And then connect the computer to the internet patch directly.

Now, check if you can access the internet. If you can, then continue the next step and if not, contact your Internet Service Provider (ISP).


At the first step, you’ve to make a connection of your computer and the modem with an Ethernet cable but without the installation of the router.

You’ve to ensure your modem has been plugged into a power source.

You can take Belkin N300 Setup Help from the respective Belkin customer care.

Step 2:

You need to verify whether or not the computer is having an internet connection. You can o this by trying to access a website.

If you are unable to access the internet, then you’ve to contact your Internet Service Provider or ISP.

If the internet connection of your modem is properly working, you might continue with your router setup.

You need to unplug the modem from the power source prior to initiating the setup process.

How to connect the devices together?

Now, you can easily make a connection to your router and modem as a preparation of setup.

Step 1:

You should connect the modem to the Internet port of the router or to the WAN.

Step 2:

Next, you’ve to plug in the modem and then the router to the power source.

Step 3:

Next, connect your computer to any of the Ethernet ports of the router.

In case you are making use of a wireless computer, you would’ve to connect it with an Ethernet cable at the first stage.

Step 4:

Now, you need to observe the light of the router (placed at the device’s upper panel). Just wait for a couple of minutes until the light converts into the solid blue color.

In case the light doesn’t convert into blue or if it’s blinking amber, then you can execute the following troubleshooting tips:

You’ve to ensure that your router has been connected to the modem in a proper way with the help of an Ethernet cable.

You’ve to power cycle the modem by making it unplugged from the power source for a couple of seconds. And then plug it to the respective power source again.

It’s time to power cycle your router by making it unplugged from the power supply of the router for only 10 seconds. Then plug in it again.

You can take Belkin N300 Setup Support if you are facing any trouble with your Belkin router.

With the above steps, you can easily set up your Belkin router without using the setup CD.


Leave a Reply

Your email address will not be published. Required fields are marked *