The Belkin 4-Socket Surge Protector is popularly used to provide safety and security to your appliances from the issue of power-rises. It is helpful in resisting energy shocks that are responsible for harmful effects to your different devices on a frequent basis. If you want to know about the basic installation steps for the Belkin Surge Protector, follow the post below.
You might know that surges, voltage fluctuations, and spikes can heavily damage the computer system and peripherals and thus the overall performance gets degraded. The brilliantly-designed Belkin Surge Protector is greatly capable of safeguarding your PC, hard drives, printer, and modems along with other equipment against data loss, damage, system crashes, and file corruption.
In this post, you will get to know about the basic installation instructions for your Belkin Surge Protector. You can take a note of the following for configuring your device successfully.
Here the discussion will be on Power Connections, Coaxial-Cable Connections, Power-Cord Manager, Phone/Fax/Modem/Network Connections, Indicator Lights, Mounting the Surge Protector, and on Safety Covers.
The Belkin Surge Protector must only be plugged into a grounded outlet and each and every piece of equipment needs to be plugged straightforwardly into it. You need to remember that the utilization of an extension cord in amalgamation with a Belkin Surge Protector would void all Belkin warranties.
Certain Belkin Surge Protector models have come with coaxial-cable surge protection. Rather than running a connection straightforwardly from your DSS receiver or TV or VCR or cable box to the wall jack, the connection needs to be passed through the protected F connectors on the Belkin Surge Protector.
You need to connect your phone or modem or fax or network line from the wall outlet to the respective Input jack on the Surge Protector. Now, it’s time to connect an RJ11 phone cord and/or RJ45 cable into the particular Output jack on this Surge Protector.
And next, you have to make a connection to the other end of that cord to the phone or modem or fax or network jack of that particular device that you prefer to protect. To know about Belkin N300 Setup, you can contact the Belkin customer care.
If you are unable to use the coaxial-cable protection, then the Connected Equipment Warranty wouldn’t provide coverage to the respectively connected equipment. Most of the TV or VCR damage can be easily prevented in case some time is invested to make a connection to coaxial-cable protection.
Some of the Belkin Surge Protector models are featured with a power-cord manager that has been integrated at the bottom of the Surge Protector. And thus the power cords can remain in tangle-free and organized mode.
You have to elevate the clip and then route the particular power cords under the clip. And now it’s time to press the clip down in order to lock the power cords in place.
Certain Belkin Surge Protector models have come with phone/fax/modem surge protection. Rather than running a connection straightforwardly from the respective phone or modem or fax or network to the wall jack, you need to pass the connection via the protected jacks on the respective Belkin Surge Protector.
To know about the Belkin N300 WiFi Router Setup, you can contact the Belkin customer care team.
The Protected light needs to be ON whenever the power switch has been turned ON. In case the particular light goes out at any time that signifies the respective Surge Protector has been sacrificed to provide protection to the particular equipment and needs to be replaced.
Mounting the Surge Protector
Belkin Surge Protectors can easily be mounted to baseboards and walls. You can make use of the two (2) mounting holes on the back side of the respective Surge Protector for providing its security to the baseboard or wall.
Some of the Belkin Surge Protector models have come with sliding safety covers on the respective outlets of the Surge Protector. It is helpful in minimizing debris and dust, present in the outlets, whenever they not in utilization. Do make sure to slide its covers completely to hide or expose the outlets.
If you want to know about Belkin N300 Setup Not Working, then you can contact the Belkin customer care team.